Publicacions

Tesis doctorals

En curs

• Ariadna Carrobé Montalvo, Energy analysis and the achievement of thermal comfort in earth buildings, supervisada per Ingrid Martorell i Albert Castell.
• Roger Vilà Miró, Numerical simulation and optimization of a hybrid radiative cooling and solar heating system, supervisada per Marc Medrano i Albert Castell.

Completades

• Sergi Vall (2021). Solar collector and radiative cooling system for heat and cold supply, supervisada per Albert Castell.
• Lídia Navarro (2016). Thermal energy storage in buildings through phase change materials (PCM) incorporation for heating and cooling purposes, supervisada per Luisa F. Cabeza i Albert Castell.
• Aran Solé (2015). Phase change materials characterization (PCM) and thermochemical materials (TCM) development and characterization towards reactor design for thermal energy storage, supervisada per Luisa F. Cabeza i Ingrid Martorell.
• Jordi Pijuan (2015). Desenvolupament d’equips per a la mesura d’esforços entre tractors i ormejos agrícoles per a la realització d’assajos en camp, supervisada per Miquel Nogués i Joan Roca.
• veure més informació

• Pere Moreno (2014). Latent heat termal energystorage units in HVAC systems for energy management, supervisada per Albert Castell i Cristian Solé.
• Alvaro De Gracia (2013). Thermal analysis of a ventilated facade with phase change materials (PCM), supervisada per Luisa F. Cabeza i Albert Castell.
• Martí Comellas (2013). Transmission system for an off-road multiple axle wheeled vehicle. Performance and energetic efficiency modelization, supervisada per Joan Roca.
• Pablo Arce (2011), Application of passive thermal energy storage in buildings using PCM and awnings, supervisada per Luisa F. Cabeza i Marc Medrano.
• Lídia Rincón (2011). Material Flow Analysis of the Building Sector in Lleida, supervisada per Luisa F. Cabeza i Albert Cuchà (UPC).
• Cristian Solé (2009). Use of Phase Change Materials (PCM) in combisystem for its energetic optimisation, Supervisada per Luisa F. Cabeza i Miquel Nogués.
• Albert Castell (2008). Analysis and implementation of thermal energy storage using PCMs for cooling Applications, supervisada per Lluïsa F. Cabeza i Marc Medrano.
• Cecilia Castellón (2008). Use of Microencapsulated Phase Change Material in Buildings, supervisada per Luisa F. Cabeza i Miquel Nogués.

Revistes científiques

• R Vilà, I Martorell, M Medrano, A Castell, (2021), Adaptive covers for combined radiative cooling and solar heating. A review of existing technology and materials, Solar Energy Materials and Solar Cells 230, 111275. (https://doi.org/10.1016/j.solmat.2021.111275).
• R Vilà, M Medrano, A Castell, (2021), Mapping Nighttime and All-Day Radiative Cooling Potential in Europe and the Influence of Solar Reflectivity, Atmosphere 12 (9), 1119. (https://doi.org/10.3390/atmos12091119)
• B Esteban, G Baquero, R Cuadros, JM Morera, (2021), Proposal and application of a new method to determine leather shrinkage temperature, Thermochimica Acta, 2021.
• A Carrobé, L Rincón, I Martorell (2021), Thermal Monitoring and Simulation of Earthen Buildings. A Review, Energies. (https://doi.org/10.1016/j.tca.2021.178880)
• A Castell, M Medrano, F Goia. (2018), Modelling Envelope Components Integrating Phase Change Materials (PCMs) with Whole-Building Energy Simulation Tools: a State of the Art, Journal of Facade Design and Engineering 6 (3), 132-148. (https://doi.org/10.7480/jfde.2018.3.2572)
• L Rincón, A Carrobé, I Martorell, M Medrano, (2019), Improving thermal comfort of earthen dwellings in sub-Saharan Africa with passive design, J. of Building Engineering, 24, 100732, (2019) (https://doi.org/10.1016/j.jobe.2019.100732).
• Rincón, Lídia; Carrobé, Ariadna; Medrano, Marc; Solé, Cristian; Castell, Albert; Martorell, Ingrid (2019), Analysis of the Thermal Behavior of an Earthbag Building in Mediterranean Continental Climate: Monitoring and Simulation, Energies.
• Vall, Sergi; Johannes, Kévyn; David, Damien; Castell, Albert (2020), A new flat-plate radiative cooling and solar collector numerical model: Evaluation and metamodeling, Energy.
• Sergi Vall; Marc Medrano; Cristian Solé; Albert Castell, (2020), Combined Radiative Cooling and Solar Thermal Collection: Experimental Proof of Concept, Energies.
• J Roca, M Comellas, J Pijuan, M Nogués, (2019), Development of an easily adaptable three-point hitch dynamometer for agricultural tractors. Analysis of the disruptive effects on the measurements.  Soil and Tillage Research, 194, 104323.
• veure més informació

• Villalobos Mori Rafael; Mias Carballal Carmen; Gas Ruiz Cristina; Maestre González Yolanda; Nogués Aymani Miquel; Vilardell Vilella Felip; Olsina Kissler Jorge Juan (2019), Atraumatic laparoscopic intraperitoneal mesh fixation using a new laparoscopic device: An animal experimental study, Hernia.
• Medrano, M., Martí, J. M., Rincón, L., Mor, G., Cipriano, J., Farid, M. (2018). Assessing the nearly zero-energy building gap in university campuses with a feature extraction methodology applied to a case study in Spain. International Journal of Energy and Environmental Engineering, 1-21.
• Roca, J., Nogués, M., Villalobos, R., Mías, M.C., Comellas, M., Gas, C., Olsina, J.J. (2018) Surgical dynamometer to simultaneously measure the tension forces and the distance between wound edges during the closure of a laparotomy. Sensors (Switzerland), 18 (1), 189. ISSN: 14248220
• Oró E; Allepuz R; Martorell I; Salom J. (2018) Design and econòmic analysis of líquid cooled data centres for waste heat recovery: A case study for an indoor swimming pool, Sustainable Cities and Society, 36, 185-
• Comellas, M., Pijuan, J., Nogués, M., Roca, J. (2018) Efficiency analysis of a multiple axle vehicle with hydrostatic transmission overcoming obstacles. Vehicle System Dynamics, 56 (1),55-77. ISSN: 00423114
• Vall S, Castell A. (2017). Radiative cooling as low-grade energy source: A literature review. Renewable and Sustainable Energy Reviews, 77, 803–820. ISSN: 1364-0321
• Navarro L, de Gracia A, Niall D, Castell A, Browne M, McCormack SJ, Griffiths P, Cabeza LF. (2016).  Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration of passive system. Renewable Energy, 85,  1334-1356.   ISSN: 0960-1481.
• Navarro L, de Gracia A, Castell A, Cabeza LF. (2016).  Experimental study of an active slab with PCM coupled to a solar air collector for heating purposes. Energy and Buildings, 128,  12-21.   ISSN: 0378-7788
• Navarro L, de Gracia A, Castell A, Cabeza LF (2016).  Experimental evaluation of a concrete core slab with phase change materials for cooling purposes. Energy and Buildings, 116(15),  411-419.   ISSN: 0378-7788
• Payá J, Corberán JM, de Gracia A, Castell A, Cabeza LF (2016).  Thermal characterization of buildings from the monitoring of the AC system consumption. Energy and Buildings, 116,  59-68.   ISSN: 0378-7788
• Sole A, Barreneche C, Martorell I, Cabeza LF (2016).  Corrosion evaluation and prevention of reactor materials to contain thermochemical material for thermal energy storage. Applied Thermal Engineering, 94,  355-363.   ISSN: 1359-4311
• Miró L, Barreneche C, Ferrer G, Solé A, Martorell I, Cabeza LF (2016).  Health hazard, cycling and thermal stability as key parameters when selecting a suitable Phase Change Material (PCM). Thermochimica Acta, 627-629,  39-47.   ISSN: 0040-6031
• Coma J, Pérez G, Solé C, Castell A, Cabeza LF (2016).  Thermal assessment of extensive green roofs as passive tool for energy savings in buildings. Renewable Energy, 85,  1106-1115.   ISSN: 0960-1481
• Castell A, Solé C. (2015). An overview on design methodologies for liquid-solid PCM storage Systems. Renewable and Sustainable Energy Reviews 52, pp. 289-307. ISSN: 1364-0321
• Solé A, Martorell I, Cabeza LF. (2015).  State of the art on gas-solid thermochemical energy storage systems and reactors for building applications. Renewable & Sustainable Energy Reviews, 47,  386-398.   ISSN: 1364-0321
• Bevilacqua P, Coma J, Pérez G, Chocarro C, Juárez A, Solé C, De Simone M, Cabeza LF (2015).  Plant cover and floristic composition 1 effect on thermal behaviour of extensive green roofs. Building and Environment, 92,  305-316.   ISSN: 0360-1323
• Ferrer G, Solé A, Barreneche C, Martorell I, Cabeza LF (2015).  Review on the methodology used in thermal stability characterization of phase change materials. Renewable & Sustainable Energy Reviews, 50,  665-685.   ISSN: 1364-0321
• de Gracia A, Navarro L, Castell A, Cabeza LF (2015).  Energy performance of a ventilated double skin facade with PCM under different climates. Energy and Buildings, 91,  37-42.   ISSN: 0378-7788
• Navarro L, de Gracia A, Castell A, Cabeza LF (2015).  Thermal behaviour of insulation and phase change materials in buildings with internal heat loads: experimental study. Energy Efficiency, 8,  895-904.   ISSN: 1570-646X
• Carreras J, Boer D, Guillén-Gosálbez G, Cabeza LF, Medrano M, Jiménez L (2015).  Multi-objective optimization of thermal modelled cubicles considering the total cost and life cycle environmental impact. Energy and Buildings, 88,  335-346.   ISSN: 0378-7788
• Perez G, Vila A, Solé C, Coma J, Castell A, Cabeza LF (2015).  The thermal behaviour of Extensive green roofs under low plant coverage conditions. Energy Efficiency, 8,  881-894.   ISSN: 1570-646X
• Solé, A.; Miró, L.; Barreneche, C.; Martorell, I.; Cabeza, LF. (2015).  Corrosion of metals and salt hydrates used for thermochemical energy storage. Renewable Energy, 75,  519-523.   ISSN: 0960-1481
• Cabeza LF, Barreneche C, Martorell I, Miró L, Sari-Bei S, Fois M, Paksoy HO, Sahan N, Weber R, Constatinescu M, Anghel EM, Malikova M, Krupa I, Delgado M, Dolado P, Furmanski P, Jaworski M, Haussmann T, Gschwander S, Fernandez AI (2015).  Unconventional experimental technologies available for phase change materials (PCM) characterization. Part 1. Thermophysical properties. Renewable & Sustainable Energy Reviews, 43,  1399-1414.   ISSN: 1364-0321
• de Gracia A, Fernandez C, Castell A, Mateu C, Cabeza LF (2015).  Control of a PCM ventilated facade using reinforcement learning techniques. Energy and Buildings, 106,  234-242.  http://dx.doi.org/10.1016/j.enbuild.2015.06.045 ISSN: 0378-7788
• Ferrer G, Solé A, Barreneche C, Martorell I, Cabeza LF. (2015).  Corrosion of metal containers for use in PCM energy storage. Renewable Energy, 76,  465-469.   ISSN: 0960-1481
• de Gracia A, Castell A, Fernández C, Cabeza LF (2015).  A simple model to predict the thermal performance of a ventilated. Energy and Buildings, 93,  137-142.   ISSN: 0378-7788
• Navarro L, de Gracia A, Castell A, Alvarez S, Cabeza LF (2015).  PCM incorporation in a concrete core slab as a thermal storage and supply system: proof of concept. Energy and Buildings, 103,  70-82.   ISSN: 0378-7788
• Coma J, Pérez G, Castell A, Solé C, Cabeza LF (2014).  Green roofs as passive system for energy savings in buildings during the cooling period: use of rubber crumbs as drainage layer. Energy Efficiency, 7(5),  841-849.   ISSN: 1570-646X
• Moreno P, Miró L, Solé A, Barreneche C, Solé C, Martorell I, Cabeza LF (2014).  Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications. Applied Energy, 125,  238-245.   ISSN: 0306-2619
• de Gracia A, Navarro L, Castell A, Boer D, Cabeza LF. (2014). Life cycle assessment of a ventilated facade with PCM in its air chamber. Solar Energy, 104, 115-123. ISSN: 0038-092X
• Pérez G, Coma J, Martorell I, Cabeza LF. (2014).  Vertical Greenery Systems (VGS) for energy saving in buildings: a review. Renewable & Sustainable Energy Reviews, 39,  139-165.   ISSN: 1364-0321
• Moreno P; Solé C; Castell A; Cabeza LF (2014).  The use of phase change materials in domestic heat pump and air-conditioning systems for short term storage: A review. Renewable & Sustainable Energy Reviews, 39,  1-13.   ISSN: 1364-0321
• Castell A, Farid MM. (2014).  Experimental validation of a methodology to assess PCM effectiveness in cooling building envelopes passively. Energy and Buildings, 81,  59-71.   ISSN: 0378-7788
• Comellas M, Pijuan J, Nogués M, Roca J. (2014).  Influence of the transmission configuration of a multiple axle vehicle on the obstacle surmounting capacity. Vehicle System Dynamics, 52(9),  1191-1210.   ISSN: 0042-3114
• Rincón L, Coma J, Perez G, Castell A, Boer D, Cabeza LF (2014).  Environmental performance of recycled rubber as drainage layer in extensive green roofs. A comparative Life Cycle Assessment. Building and Environment, 74,  22-30.   ISSN: 0360-1323
• Navarro L, de Gracia A, Castell A, Alvarez S, Cabeza LF (2014).  Design of a prefabricated concrete slab with PCM inside the hollows. Energy Procedia, 57,  2324-2332.   ISSN: 1876-6102
• Coma J, Pérez G, Solé C, Castell A, Cabeza LF (2014).  New green facades as passive systems for energy savings on buildings. Energy Procedia, 57,  1851-1859.   ISSN: 1876-6102
• Zsembinszki G, Moreno P, Solé C, Castell A, Cabeza LF (2014).  Numerical model evaluation of a PCM cold storage tank and uncertainty analysis of the parameters. Applied Thermal Engineering, 67,  16-23.  http://www.sciencedirect.com/science/article/pii/S1359431114001471 ISSN: 1359-4311
• Tay NHS; Belusko M; Castell A; Cabeza LF; Bruno F  (2014).  An effectiveness-NTU technique for characterising a finned tubes PCM system using a CFD model. Applied Energy, 131,  377-385.   ISSN: 0306-2619
• Dutil Y, Rousse D, Lassue S, Zalewski L, Joulin A, Virgone J, Kuznik F, Johannes K, Dumas JP, Bédécarrats JP, Castell A, Cabeza LF (2014).  Modeling phase change materials behavior in building applications: Comments on material characterization and model validation. Renewable Energy, 61,  132-135.   ISSN: 0960-1481
• Moreno P, Castell A, Solé C, Zsembinszki G, Cabeza LF. (2014).  PCM thermal energy storage tanks in heat pump system for space cooling. Energy and Buildings, 82,  399-405.   ISSN: 0378-7788
• Solé A, Miró L, Barreneche C, Martorell I, Cabeza LF (2014).  Corrosion test of salt hydrates and vessel metals for thermochemical energy storage. Energy Procedia, 48,  431-435.   ISSN: 1876-6102
• Cabeza LF; Rincón L; Vilariño V; Pérez G; Castell A (2014).  Life cycle assessment (lca) and life cycle energy analysis (lcea) of buildings and the building sector: a review. Renewable & Sustainable Energy Reviews, 29,  394-416.   ISSN: 1364-0321
• Sole A, Neumann H, Niedermaier S, Martorell I, Schossig P, Cabeza LF (2014).  Stability of sugar alcohols as PCM for thermal energy storage. Solar Energy Materials and Solar Cells, 126,  125-134.   ISSN: 0927-0248

Capítols de llibres

• Albert Castell; Marc Medrano; Sergi Vall, Computational performance prediction of phase change materials in opaque components, in Building Performance Simulation and Characterisation of Adaptive Facades – Adaptive Facade Network, ISBN: 978-94-6366-111-9.
• Lídia Rincón, Albert Castell, Cristian Solé, Ingrid Martorell, Martí Comellas, Miquel Nogués, Joan Roca, Javier Bradineras, Marc Medrano, Sostenibilidad en Energía, Maquinaria Industrial y Edificios (SEMB), en Monitorización y evaluación de la habitabilidad, calidad del aire y eficiencia energética de los edificios, Red de excelencia MONITOR, BIA2017-90912-RED, ISBN: 978-84-120787-2-5, 2019.
• Ingrid Martorell; Lidia Rincón; Albert Castell; Marc Medrano; Cristian Solé; Ariadna Carrobé; Roger Vilà, Análisis térmico de un edificio Earthbag en clima continental Mediterráneo. Monitorización y simulación, en Monitorización y evaluación de la habitabilidad, calidad del aire y eficiencia energética de los edificios. Experiencias en España. BIA2017-90912-REDT, ISBN 978-84-122767-4-9.
• Marc Medrano; Lidia Rincón; Albert Castell; Ingrid Martorell; Cristian Solé, Análisis energético de los edificios de la Universidad de Lleida. Cómo de lejos se está de los Edificios de consumo de energía casi nulo (nZEB) , en Monitorización y evaluación de la habitabilidad, calidad del aire y eficiencia energética de los edificios. Experiencias en España. BIA2017-90912-REDT. Experiencias en España. BIA2017-90912-REDT, ISBN 978-84-122767-4-9.
• Reducing the Life Cycle Environmental Impact of Buildings Following a Simulation-Optimization Approach, Joan Carreras, Dieter Boer, Luisa F Cabeza, Marc Medrano, Laureano Jiménez, Gonzalo Guillén-Gosálbez, Advances in Energy Systems Engineering, 823-839,Springer International Publishing, 2017.
• Thermal Energy Storage Materials Chalenges and Availability, Chapter 31, Ana Inés Fernández, Camila Barreneche, Mónica Martínez, Mercè Segarra, Ingrid Martorell, Luisa Fernanda Cabeza, Volume 5, Energy Storage-Handbook of Clean Energy Sysems, 2935-2945, John Wiley&Sons Inc, 2015.
• Introduction to Thermal Energy Storage (TES) Systems, Luisa Fernanda Cabeza, Ingrid Martorell, Laia Miró, Ana Inés Fernández, Camila Barreneche, Advances in Thermal Energy Storage Systems. Methods and Applications, 1-28, Woodhead Publishing Limited.
• Design of latent heat storage systems using phase change materials (PCMs). Albert Castell, Cristian Solé. Advances in Thermal Energy Storage Systems: Methods and Applications, 285 – 305. Woodhead Publishing Limited, 2015, ISBN 978-1-78242-088-0.
• veure més informació

• Life cycle assessment (LCA) of phase change materials (PCMs) used in buildings. Luisa F. Cabeza, Albert Castell, Gabriel Pérez. Eco-efficient construction and building materials. Life cycle assessment (LCA), eco-labelling and case studies, 287 – 310, Woodhead Publishing Limited, 2014. ISBN 978-0-85709-767-5.

Congressos

• Martorell, Ingrid; Medrano, Marc; Gregorio, Eduard (2021). Tastem l’energia: Proposta d’ensenyament-aprenentatge per acostar les enginyeries a alumnes de secundària i batxillerat a la UdL, XI Congrés Internacional de Docència Universitària i Innovació.
• Taddeo, P.; Romaní,J.; Summers, J., Gustafsson, J., Martorell, I.; Salom, J. (2021). Fuel Cell powered air-cooled data centre: cogeneration solutions for district heating networks, International Conference on Polygeneration (ICP2021).
• Martorell, I.; Camarasa, J.; Vilà, R.; Solé, C.; Castell, A.  (2021). RCE as a device to produce heating and cooling. Transmittance and aging study for cover materials suitable for radiative cooling, International Conference Polygeneration (ICP2021).
• Martorell, Ingrid; Molina, Fidel (2021). Sessió Monogràfica ‘Nous perfils, habilitats i formes d’aprenentatge de l’alumnat per a la construcció del projecte formatiu’, XI Congrés Internacional de Docència Universitària (CIDUI 2020+1).
• Vilà, R.; Rincón, L.; Medrano, M.; Castell, A. (2021). Potential Maps for Combined Nocturnal Radiative Cooling and Diurnal Solar Heating Applications. Cases of Spain, Switzerland, Germany and Sweden, International Conference Polygeneration (ICP2021).
• Badia, Ferran; Castell, Albert; Giné, Francesc; Lerida, Josep L.; Molto, M.  (2021). Pioners en la formació dual a l’enginyeria: 5 anys innovant, XI Congrés Internacional sobre Docència Universitària i Innovació. (CIDUI).
• veure més informació

• Marc Medrano; Lidia Rincón; Ariadna Carrobé; Albert Castell (2020). Analysis of renewable energy contribution and energy use in university campuses for assessing the nearly zero-energy building gap, ICREN – International Conference on Renewable Energy.
• Sergi Vall; Kévyn Johannes; Damien David; Albert Castell (2020). Flat-Plate Radiative Cooling And Solar Thermal Collector Numerical Model Evaluation, ICREN – International Conference on Renewable Energy.
• Roger Vilà; Lídia Rincón; Marc Medrano; Albert Castell (2020). Radiative Cooling Potential Maps for Spain, Eurosun 2020 Conference.
• Ariadna Carrobé; Marc Medrano; Cristian Solé; Ingrid Martorell; Lidia Rincón; Albert Castell (2020). Experimental Study of a Combined Solar Heating and Radiative Cooling Device with an Adaptive Cover, EUROSUN 2020.
• Roger Vilà; Marc Garcia; Marc Medrano; Ingrid Martorell; Albert Castell (2020). Combining Radiative Collector and Emitter with Compression Heat Pump: Numerical Analysis, Eurosun 2020 Conference.
• Roger Vilà; Ingrid Martorell; Marc Medrano; Albert Castell  (2020). Optimal Characteristics of an Adaptive Windshield for a Solar Collector and Radiative Cooling Combined System, Eurosun 2020 Conference.
• Ariadna Carrobé; Ingrid Martorell; Cristian Solé; Albert Castell (2020). Transmittance analysis for materials suitable as radiative cooling windshield and aging study for polyethylene, EUROSUN 2020.
• Morera, J.M.; Esteban, B.; Baquero, G.; Cuadros, R. (2019). A new system to measure leather Shrinkage temperature , XXXV IULTCS Congress of the International Union of Leather Technologists and Chemists Societies.
• Vall, Sergi; Castell, Albert ;Solé, Cristian; Medrano, Marc (2018). Radiative Collector and Emitter: Experimental Results , EuroSun 2018.
• Rincón, Lídia ; Martorell, Ingrid; Carrobé, Ariadna; Solé, Cristian; Medrano, Marc (2018). Thermal monitoring on an earthbag building in Mediterranean continental climate, EuroSun 2018
• Martorell, Ingrid; Medrano, Marc; Rincón, Lídia (2018).  Anàlisi del disseny i implementació de la classe inversa en una assignatura optativa del Grau d’Enginyeria Mecànica, CIDUI
• Comellas, Martí; Roca, Joan; Nogués, Miquel; Martorell, Ingrid (2018).  Eina virtual per a l’anàlisi cinemàtica de mecanismes, CIDUI
• Martorell, Ingrid  (2018). Sessió oral 3.2, 5 Juliol 2018, 9h-10:30 h, Espais Físics d’aprenentage, CIDUI.
• Vall, Sergi; Carrobé, Ariadna; Medrano, Marc; Martorell, Ingrid; Rincón, Lídia; Castell, Albert (2018). Radiative cooling to cover cooling demands of an Earthbag building in a Training Medical center in Burkina Faso, EuroSun 2018.
• Albert Castell; Marc Medrano; Francesco Goia (2018). Modelling envelope components integrating Phase Change Materials (PCMs) with Building Performance Simulation tools: a state of the art, FACADE 2018 – ADAPTIVE!
• Vall, S; Castell, A. (2017). Potential implementation of radiative cooling coupled with solar collection, Póster, Internatinal Conference on Solar Energy for Buildings and Industry (11th ISES EuroSun), Palma de Mallorca, ESPANYA.
• Rincon L, Albano L, Vall S, Medrano M. (2016). Passive systems for energy savings of buildings in tropical climate, Presentació Comunicació, Internatinal Conference on Solar Energy for Builldings and Industry (11th ISES EuroSun), ESPANYA.
• Rincón L, Castro JR, Solé C (2016).  Earthbag housing in development cooperation projects and emergency shelter after humanitarian disaster. Pòster. Terra 2016. XII World Congress on Earthen Architecture. Lyon, FRANÇA.
• Navarro A, Rincón L, González B, Palumbo M, Lacasta AM (2016). Revestimiento de fibras vegetales en sistemas de aislamiento de tapia.  Presentació Comunicació. Terra 2016. XII World Congress on Earthen Architecture. Lyon, FRANÇA.
• González B, Navarro A, Rincón L (2016). Correlación de NDT versus resistencia a compresión en tapia. Presentació Comunicació. Terra 2016. XII World Congress on Earthen Architecture. Lyon, FRANÇA.
• de Gracia A, Navarro L, Castell A, Cabeza LF (2015).  Implementation of a control system in a ventilated facade with PCM. Presentació Comunicació,  9th International Renewable Energy Storage Conference (IRES 2015), ALEMANYA.
• Navarro L, de Gracia A, Castell A, Cabeza LF (2015).  Concrete core slab activation with PCM: concept and design. Presentació Comunicació,  The 7th International Conference on Applied Energy – ICAE2015, UNIÓ DELS EMIRATS ÀRABS.
• de Gracia A, Fernandez C, Castell A, Cabeza LF  (2015).  Reinforcement learning techniques applied to control a latent heat thermal energy storage system. Contribució rellevant,  GREENSTOCK 2015 – The 13th International Conference on Energy Storage . Proceedings del congreso,  Beijing, XINA.
• Carreras J, Boer D, Guillén-Gosálbez G,Cabeza L, Medrano M, Jiménez L (2015).  Optimización multi-objetivo de cubículos: minimización del coste y del impacto ambiental. Presentació Comunicació,  IX Congreso Nacional de Ingeniería Termodinámica , Cartagena, ESPANYA.
• de Gracia A, Fernandez C, Castell A, Cabeza LF (2015).  Reinforcement learning techniques applied to control a latent heat thermal energy storage system. Presentació Comunicació,  GREENSTOCK 2015 – The 13th International Conference on Energy Storage. Proceedings del congreso, Beijing, XINA.
• Navarro L, de Gracia A, Castell A, Cabeza LF (2015).  Prefabricated concrete slab with phase change materials for cooling purposes. Presentació Comunicació,  GREENSTOCK 2015 – The 13th International Conference on Energy Storage. Proceedings del congreso, Beijing, XINA.
• Solé A, Barreneche C, Martorell I, Cabeza LF (2015).  A new setup to test thermochemical material (TCM) corrosion under vacuum conditions. Póster,  GREENSTOCK 2015 – The 13th International Conference on Energy Storage. Proceedings del congreso, Beijing, XINA.
• Carreras J, Boer D, Guillén-Gonsálbez G, Cabeza LF, Medrano M, Jiménez L (2015).  Optimizacion multi-objetivo de cubículos con minimización del coste y del impacto ambiental. Presentació Comunicació,  9º Congreso Nacional de Ingeniería Termodinámica – 9CNIT. Proceedings del congreso, Cartagena, ESPANYA.
• Martorell I, Solé A, Barreneche C, Fernández AI, Cabeza LF (2015).  Las sales hidratadas como nuevo material para sistemas de almacenamiento térmico termoquímico compactos y de alta densidad energética. Presentació Comunicació,  9º Congreso Nacional de Ingeniería Termodinámica – 9CNIT. Proceedings del congreso, Cartagena, ESPANYA.
• Villalobos R, Escartin A, Mias MC, Nogues M, Roca J, Gas C; Cabeza LF, Olsina JJ (2014). Measuring biomechanics of abdominal wall closure. Pòster, 36th Annual International Congress of the European Hernia Society, Edinburgo, Reino Unido
• Traveria, M; Medrano, M; Hernández, M; Bret, D; Medina, D; Besora, E; Martorell, I; Gavaldà, J (2014).  Tablet PC for flight instruction. Presentació Comunicació,  The European Airline Training Symposium 2014 (EATS 2014), Berlin, ALEMANYA.
• Ferrer G, Solé A, Barreneche C, Martorell I, Cabeza LF (2014).  Corrosion of metal containers for use in PCM energy storage. Presentació Comunicació,  EuroSun 2014 – International Conference of Solar Energy and Buldings, Aix-les-Bains, FRANÇA.
• Navarro L, de Gracia A, Castell A, Alvarez S, Cabeza LF (2014).  Experimental study of active slab with PCM during summer period. Presentació Comunicació,  EuroSun 2014 – International Conference of Solar Energy and Buldings, Aix-les-Bains, FRANÇA.
• Gasia J, Miró L, Tarragona J, Martorell I, Solé A, Cabeza LF (2014).  Experimental analysis of RT-58 as phase change material (PCM) for domestic hot water (DHW) applications. Póster,  EuroSun 2014 – International Conference of Solar Energy and Buldings, Aix-les-Bains, FRANÇA.
• Barreneche C, Solé A, Ferrer G, Martorell I, Cabeza LF (2014).  Thermal cycling test of PCM to ensure long-term performance of domestic hot water systems. Póster,  EuroSun 2014 – International Conference of Solar Energy and Buldings, Aix-les-Bains, FRANÇA.
• de Gracia A, Navarro L, Castell A, Cabeza LF (2014).  Numerical study of a ventilated facade with PCM for cooling applications under different climate conditions. Presentació Comunicació,  Grand Renewable Energy 2014, Tokio, JAPÓ.
• Rincón L, Serrano S, Cabeza LF, González B, Navarro A, Bosch M (2014). Experimental rammed earth prototypes in Mediterranean climate. Presentació Comunicació, International Conference on Vernacular Heritage, Sustainability and Earthen Architecture. Valencia, ESPANYA.
• Barreneche C, Gil A, Solé A, Martorell I, Cabeza LF, Fernández AI (2014), Enhanced PCM doped with conductive particles to improve the heat transfer, Pòster, Eurotherm Seminar 99-Advances in Thermal Energy Storage, Lleida, ESPANYA.
• Navarro L, de Gracia A, Castell A, Cabeza LF (2014).  Thermal energy storage in sustainable buildings: passive and active systems. Presentació Comunicació,  World SB14 Barcelona. Sustainable Building: Results… Are we moving as quickly as we should? It’s up to us!, Barcelona, ESPANYA.
• de Gracia A, Navarro L, Castell A, Cabeza LF (2014).  Energetic performance of a VDSF with PCM under different weather conditions. Presentació Comunicació,  Materials Science and Technology (MS&T) 2014, Pittsburg, Pennsylvania, ESTATS UNITS D’AMÈRICA.
• Barreneche C, Solé A, Martorell I, Martínez M, Cabeza LF, Fernández AI (2014).  Thermal energy storage (TES) requirements and constrains for a material-based design. Presentació Comunicació,  Materials Science and Technology (MS&T) 2014, Pittsburg, Pennsylvania, ESTATS UNITS D’AMÈRICA.
• Coma J, Pérez G, Solé C, Castell A, Cabeza LF (2014).  Vertical Greenery Systems (VGS) for energy savings in buildings. Presentació Comunicació,  International Green Wall Conference, Stoke-on-Trent, REGNE UNIT.
• de Gracia A, Navarro L, Castell A, Cabeza LF (2014).  Energetic performance of a ventilated double skin facade with PCM. Conferència invitada,  Thermal Energy Storage in buildings. A workshop organised by XARMAE, Barcelona, ESPANYA.
• Barreneche C, Solé A, Ferrer G, Martorell I, Fernández AI, Cabeza LF (2014).  PCM screening: cycling stability and durability. Presentació Comunicació,  IX Experts Meeting of the Task 42/Annex 29 of the International Energy Agency, Lyon, FRANÇA.
• Navarro L, de Gracia A, Castell A, Alvarez S, Cabeza LF (2014).  Experimental study of a prefabricated concrete slab with PCM. Presentació Comunicació,  Eurotherm Seminar #99 – Advances in Thermal Energy Storage. Proceedings of the conference, Lleida, ESPANYA.
• de Gracia A, Navarro L, Castell A, Cabeza LF (2014).  Numerical study of using PCM in a versatile ventilated facade. Presentació Comunicació,  Eurotherm Seminar #99 – Advances in Thermal Energy Storage. Proceedings of the conference, Lleida, ESPANYA.
• Gasia J, Miró L, Solé A, Martorell I, Kelly M, Bauer B, Van Bael J, Diriken J, Griffiths P, Redpath D, Cabeza LF (2014).  MERITS Project: A comparative study of four different PCM energy storage systems for domestic hot water (DHW) applications. Póster,  Eurotherm Seminar #99 – Advances in Thermal Energy Storage. Proceedings of the conference, Lleida, ESPANYA.
• Ferrer G, Solé A, Barreneche C, Martorell I, Cabeza LF (2014).  Corrosion of aluminium for use in PCM energy storage. Póster,  Eurotherm Seminar #99 – Advances in Thermal Energy Storage. Proceedings of the conference, Lleida, ESPANYA.
• Carreras J, Boer D, Gillén-Gonsálbez G, Jiménez L, Medrano M, Cabeza LF (2014).  Multi-objective optimization applied to thermal modeling cubicles. Presentació Comunicació,  Eurotherm Seminar #99 – Advances in Thermal Energy Storage. Proceedings of the conference, Lleida, ESPANYA.
• Moreno P, Castell A, Solé C, Zsembinski G, Cabeza LF (2014).  Experimental analysis of heat pump coupled to TES tanks using PCM for load shifting. Póster,  Eurotherm Seminar #99 – Advances in Thermal Energy Storage. Proceedings of the conference, Lleida, ESPANYA.
• Rincón L, Serrano S, Castell A, Pérez G, Cabeza LF (2014).  Thermal behavior of rammed earth in buildings with internal heat loads compared to conventional brick facades: experimental study. Póster,  Eurotherm Seminar #99 – Advances in Thermal Energy Storage. Proceedings of the conference, Lleida, ESPANYA.
• Solé A, Martorell I, Cabeza LF (2014).  Review on thermochemical reactors for building comfort applications. Presentació Comunicació,  Eurotherm Seminar #99 – Advances in Thermal Energy Storage. Proceedings of the conference, Lleida, ESPANYA.
• Navarro L, de Gracia A, Castell A, Alvarez S, Cabeza LF (2014).  Thermal analysis of a prefabricated concrete slab with PCM. Póster,  International Sustainable Built Environment Conference – ISBE 2014, Doha, QATAR.
• Moreno P, Castell A, Solé C, Cabeza LF (2014).  PCM thermal energy storage tanks in heat pump system for space heating. Presentació Comunicació,  International Sustainable Built Environment Conference – ISBE , Doha, QATAR.

Patents

• Inventors: Roca J, Mias MC, Nogues M, Villalobos R. Títol: Instrumento para medir parámetros asociados a una incisión en un tejido y procedimiento para medir parámetros en una incisión en un tejido mediante dicho instrumento. N.º de sol·licitud: P201630202. País de prioritat: España. Data de prioritat: 2016. Entitat titular: UdL – IRB Lleida. Empresa/es que l’estan explotant: UdL – IRB Lleida.
• Inventors: Canela R, Balcells M, Eras J, Sala N, Yara E, Escriba M, Barreneche C, Martorell I, Cabeza LF. Títol: Sales de bisimidazolio para el almacenamiento de energía. N.º de sol·licitud: P201531615. País de prioritat: España. Data de prioritat: 2015. Entitat titular: UdL. Empresa/es que l’estan explotant: Universitat de Lleida.
• Inventors: Cortes J, Álvarez S, Cabeza LF, Ruiz A, Castell A.Títol: Cerramiento y fachada ventilados. N.º de sol·licitud: PCT/ES2011/070872. País de prioritat: España. Data de prioritat: 2011. Entitat titular: DETEA. Empresa/es que l’estan explotant: Universidad de Sevilla.
• Inventors: Cortes J, Álvarez S, Cabeza LF, Ruiz A, Castell A. Títol: Losa y forjado alveolar. N.º de sol·licitud: PCT/ES2011/070873. País de prioritat: España. Data de prioritat: 2011. Entitat titular: DETEA. Empresa/es que l’estan explotant: Universidad de Sevilla.